Installation instructions for the CV idle needle-repacking kit.
This kit is designed to replace the spring, o-ring and washer in the Keihin CV carburetor used on all H-D big twin models from 1990 to present and Sportster models from 1989 to present. It will also fit in the butterfly Keihin carburetor used on big twins and Sportster up to 1990 (1989 for Sportster models).
The order of assembly onto the needle is spring, washer then o-ring. Do NOT place the o-ring directly onto the spring, as it will be damaged.
See the image below for reference. Note that the CP005 EZ-just needle is shown for reference and is not part of the repacking kit.
Notice: This product owned by CV Performance.
Copyright Johns Motorcycle parts 2016 all rights reserved
Copyright 2007 www.johnsmotorcycleparts.com